International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies

Archives

TuEngr+Logo
:: International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies

http://TuEngr.com TuEngr+QR-Code


ISSN 2228-9860
eISSN 1906-9642
CODEN: ITJEA8


FEATURE PEER-REVIEWED ARTICLE

Vol.12(9) (2021)

Special Issue on the Universiti Teknologi MARA (UiTM) R&D Showcase

References

  1. U. R. Hashim, A. Jumahat, and M. F. M. Ghazali, "Quasi-static indentation properties of aluminium foam-FRP sandwich panel," Int. J. Eng. Technol., vol. 7, no. 3, 2018.
  2. M. F. Ismail, A. Jumahat, U. R. Hashim, and A. Kalam, "Aluminium foam sandwich panel with hybrid FRP composite face-sheets: Flexural properties," Pertanika J. Sci. Technol., vol. 25, no. S8, 2017.
  3. X. Wang, X. Zhao, Z. Wu, Z. Zhu, and Z. Wang, "Interlaminar shear behavior of basalt FRP and hybrid FRP laminates," J. Compos. Mater., vol. 50, no. 8, pp. 1073-1084, 2016.
  4. S. Ilangovan, S. S. Kumaran, A. Vasudevan, and K. Naresh, "Effect of silica nanoparticles on mechanical and thermal properties of neat epoxy and filament wounded E-glass/epoxy and basalt/epoxy composite tubes," Mater. Res. Express, vol. 6, no. 8, 2019.
  5. C. A. Chairman and S. P. Kumaresh Babu, "Mechanical and abrasive wear behavior of glass and basalt fabric-reinforced epoxy composites," J. Appl. Polym. Sci., vol. 130, no. 1, pp. 120-130, 2013.
  6. G. Ma, L. Yan, W. Shen, D. Zhu, L. Huang, and B. Kasal, "Effects of water, alkali solution and temperature ageing on water absorption, morphology and mechanical properties of natural FRP composites: Plant-based jute vs. mineral-based basalt," Compos. Part B Eng., vol. 153, no. August, pp. 398-412, 2018.
  7. G. Simeoli et al., "Comparison of low velocity impact behaviour of thermoplastic composites reinforced with glass and basalt woven fabrics," in 16th European Conference on Composite Materials, ECCM2014, 2014.
  8. T. Bhat, E. Kandare, A. G. Gibson, P. Di Modica, and A. P. Mouritz, "Compressive softening and failure of basalt fibre composites in fire: Modelling and experimentation," Compos. Struct., vol. 165, pp. 15-24, 2017.
  9. J. Li, C. Wu, H. Hao, Z. Liu, and Y. Yang, "Basalt scale-reinforced aluminium foam under static and dynamic loads," Compos. Struct., vol. 203, no. July, pp. 599-613, 2018.
  10. Z. Lu, "Long-Term Durability of Basalt Fiber-Reinforced Polymer (BFRP) Sheets and the Epoxy Resin Matrix under a Wet - Dry Cyclic Condition in a Chloride-Containing Environment," Polymers (Basel)., vol. 9, no. 652, pp. 1-15, 2017.
  11. A. Dorigato and a. Pegoretti, "Flexural and impact behaviour of carbon/basalt fibers hybrid laminates," J. Compos. Mater., vol. 48, no. 9, pp. 1121-1130, 2013.
  12. V. Manikandan, J. T. Winowlin Jappes, S. M. Suresh Kumar, and P. Amuthakkannan, "Investigation of the effect of surface modifications on the mechanical properties of basalt fibre reinforced polymer composites," Compos. Part B Eng., vol. 43, no. 2, pp. 812-818, 2012.
  13. T. F?rster, G. S. Sommer, E. M?der, and C. Scheffler, "Surface, interphase and tensile properties of unsized, sized and heat treated basalt fibres," IOP Conf. Ser. Mater. Sci. Eng., vol. 139, p. 12019, 2016.
  14. T. Bhat, D. Fortomaris, E. Kandare, and A. P. Mouritz, "Properties of thermally recycled basalt fibres and basalt fibre composites," J. Mater. Sci., vol. 53, no. 3, pp. 1933-1944, 2018.
  15. L. Peponi, D. Puglia, L. Torre, L. Valentini, and J. M. Kenny, "Processing of nanostructured polymers and advanced polymeric based nanocomposites," Mater. Sci. Eng. R Reports, vol. 85, no. Supplement C, pp. 1-46, 2014.
  16. F. Wang, L. T. Drzal, Y. Qin, and Z. Huang, "Enhancement of fracture toughness, mechanical and thermal properties of rubber/epoxy composites by incorporation of graphene nanoplatelets," Compos. Part A Appl. Sci. Manuf., vol. 87, pp. 10-22, 2016.
  17. J. Wei, T. Vo, and F. Inam, "Epoxy/graphene nanocomposites - processing and properties: a review," RSC Adv., vol. 5, no. 90, pp. 73510-73524, 2015.
  18. J. You, J. Y. Q. Cao, S. C. Chen, and Y. Z. Wang, "Preparation of polymer nanocomposites with enhanced mechanical properties using hybrid of graphene and partially wrapped multi-wall carbon nanotube as nanofiller," Chinese Chem. Lett., vol. 28, no. 2, pp. 201-205, 2017.
  19. A. D. de Oliveira and C. A. G. Beatrice, "Polymer Nanocomposites with Different Types of Nanofiller," in Nanocomposites - Recent Evolutions, Publisher: IntechOpen, 2018.
  20. A. Almasi, A. Porumb, A. C. Podariu, L. Todor , S. A. Tofan , R. A. Popovici, "The Effects of Nanofillers on Composite Materials Mechanical Properties," Revista de Chimie, vol. 68, no. 1, pp. 192-199, 2017.
  21. S. Singh, V. K. Srivastava, and R. Prakash, "Influences of carbon nanofillers on mechanical performance of epoxy resin polymer," Appl. Nanosci., vol. 5, no. 3, pp. 305-313, 2015.
  22. N. Sharma, S. N. Alam, B. C. Ray, S. Yadav, and K. Biswas, "Silica-graphene nanoplatelets and silica-MWCNT composites: Microstructure and mechanical properties," Diam. Relat. Mater., vol. 87, no. May, pp. 186-201, 2018.
  23. J. Phiri, P. Gane, and T. C. Maloney, "General overview of graphene: Production, properties and application in polymer composites," Mater. Sci. Eng. B, vol. 215, pp. 9-28, 2017.
  24. M. R. Massimiliano D’Arienzo, E. Callone, and L. T. and F. M. Lucia Conzatti, Barbara Di Credico, Sandra Dir?, Luca Giannini, Stefano Polizzi, Ilaria Schizzi, Roberto Scotti, "Hybrid SiO2@POSS nanofiller: a promising reinforcing system for rubber nanocomposites," Mater. Chem. Front., vol. 1, pp. 1441-1452, 2017.
  25. S. Fotouhi, J. Clamp, A. Bolouri, T. R. Pozegic, and M. Fotouhi, "Investigating polyethersulfone interleaved Glass/Carbon hybrid composite under impact and its comparison with GLARE," Compos. Struct., vol. 226, p. 111268, 2019.
  26. H. Zhang, Y. Liu, M. Huang, E. Bilotti, and T. Peijs, "Dissolvable thermoplastic interleaves for carbon nanotube localization in carbon/epoxy laminates with integrated damage sensing capabilities," Struct. Heal. Monit., vol. 17, no. 1, pp. 59-66, 2018.
  27. W. Zheng, Z. Yao, H. Lin, J. Zhou, H. Cai, and T. Qi, "Improved fracture toughness of carbon fiber fabric/epoxy composite laminates using polyether sulfone fibers," High Perform. Polym., vol. 31, no. 8, pp. 996-1005, 2019.
  28. Y. Rosetti, P. Alcouffe, J. P. Pascault, J. F. G?rard, and F. Lortie, "Polyether sulfone-based epoxy toughening: From micro- to nano-phase separation via PES end-chain modification and process engineering," Materials (Basel)., vol. 11, no. 10, 2018.
  29. J. L. Zhou, C. Cheng, H. Zhang, Z. Y. Sun, S. Zhu, and M. H. Yu, "Dissolution behaviour of polyethersulfone in diglycidyl ether of bisphenol-A epoxy resins," IOP Conf. Ser. Mater. Sci. Eng., vol. 213, no. 1, 2017.
  30. S. E. Lee, E. Jeong, M. Y. Lee, M. K. Lee, and Y. S. Lee, "Improvement of the mechanical and thermal properties of polyethersulfone-modified epoxy composites," J. Ind. Eng. Chem., vol. 33, pp. 73-79, 2016.


Other issues:
Vol.12(9)(2021)
Vol.12(8)(2021)
Vol.12(7)(2021)
Vol.12(6)(2021)
Vol.12(5)(2021)
Vol.12(4)(2021)
Archives




Call-for-Papers

Call-for-Scientific Papers
Call-for-Research Papers: ITJEMAST invites you to submit high quality papers for full peer-review and possible publication in areas pertaining engineering, science, management and technology, especially interdisciplinary/cross-disciplinary/multidisciplinary subjects.

To publish your work in the next available issue, your manuscripts together with copyright transfer document signed by all authors can be submitted via email to Editor @ TuEngr.com (no space between). (please see all detail from Instructions for Authors)


Publication and peer-reviewed process:
After the peer-review process (4-10 weeks), articles will be on-line published in the available next issue. However, the International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies cannot guarantee the exact publication time as the process may take longer time, subject to peer-review approval and adjustment of the submitted articles.

Disclaimer: All products names including trademarksTM or registered® trademarks as well as intellectual properties mentioned in ITJEMAST's articles are the property of their respective owners, using for identification and educational purposes only. Use of them does not imply any endorsement or affiliation. Information publisihed in ITJEMAST, reflected only personal view of the authors, is very fact specific with particular assumptions and thus may not apply to any specific situations. Specific advices should sought from professionals in the fields. Under no circumstances shall its Editors, Editorial Board members, and the authors be liable for any direct or indirect, incidental or consequential losses or damages that result from the uses of or the reliances upon the ITJEMAST published information.

©2021 All Rights Reserved.