International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies

Archives

TuEngr+Logo
:: International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies

http://TuEngr.com


ISSN 2228-9860
eISSN 1906-9642
CODEN: ITJEA8


FEATURE PEER-REVIEWED ARTICLE

Vol.13(8)(2022)

  • The Use of Augmented Reality and 3D Printing Technologies in Planning and Conducting Surgical Intervention in Orthopedics

    Rauf Rafikovich Alekberov ( Saratov State Medical University, Saratov, RUSSIA),
    Marina Viktorovna Zhedrinskaya (Sechenov First Moscow State Medical University of the Ministry of Health of the Russian Federation, Moscow, RUSSIA),
    Alina Andreevna Korzan ( Rostov State Medical University, Rostov-on-Don, RUSSIA),
    Zumrud Nasirovna Akhaeva ( Dagestan State Medical University, Makhachkala, Republic of Dagestan, RUSSIA),
    Alevtina Olegovna Fursova ( Stavropol State Medical University, Stavropol, RUSSIA),
    Nasira Ukashatovna Bargisheva (Kabardino-Balkarian State University, Nalchik, Republic of Kabardino-Balkaria, RUSSIA),
    Havazh-Baudi Shamhanovich Mezhidov (Saratov State Medical University, Saratov, RUSSIA),
    Alina Yurievna Maslova ( Stavropol State Medical University, Stavropol, RUSSIA),
    (Socmedica, Skolkovo, Moscow, RUSSIA ),
    Aida Muradovna Gadzhieva, Magomed Gasainievich Gadzhiev (Dagestan State Medical University, Makhachkala, Republic of Dagestan, RUSSIA).

    Disciplinary: Medicine, orthopedics, traumatology.

    ➤ FullText

    doi: 10.14456/ITJEMAST.2022.166

    Keywords: Surgical intervention, three-dimensional model, additional reality glasses, HoloLens, Robotic-Assisted Surgery, 3D images, HoloDoctor, orthopedics

    Abstract
    Currently, the use of augmented reality and 3D printing technologies is becoming increasingly popular when planning and conducting surgical operations in patients with musculoskeletal pathology. In 2019-2021, more than 80 operations were performed on knee joints, ligaments and spine using new technology. We have developed a technique that allows for preoperative planning using original software and additional reality glasses (additional reality complex). During the operation, the additional reality complex performs assistance, providing access to the data of additional methods of examination of the patient and making an "overlay" on the operating field in glasses of the additional reality of normal anatomy or previously performed MRI or CT data. The new method of simulation and use of augmented reality glasses with the HoloDoctor program for implantological treatment demonstrated a good visualization of the anatomical features of the implant placement area, provided an opportunity for the surgeon to thoroughly study the intervention area before surgery, perform surgery in the conditions of the patient's real anatomy, including using the navigation in augmented reality.

    Paper ID: 13A8S

    Cite this article:

    Alekberov, R.R., Zhedrinskaya, M.V., Korzan, A.A., Akhaeva, Z.N., Fursova, A.O., Bargisheva, N.U., Mezhidov, H.-B.Sh., Maslova, A.Yu., Gadzhieva, A.M., Gadzhiev, M.G. (2022). The Use of Augmented Reality and 3D Printing Technologies in Planning and Conducting Surgical Intervention in Orthopedics. International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies, 13(8), 13A8S, 1-13. http://TUENGR.COM/V13/13A8S.pdf DOI: 10.14456/ITJEMAST.2022.166

References

  1. Mishvelov AE, Ibragimov AK, Amaliev IT, Esuev AA, Remizov OV, Dzyuba MA, et al. Computer-Assisted Surgery: Virtual- and Augmented-Reality Displays for Navigation During Planning and Performing Surgery on Large Joints. Pharmacophore. 2021; 12(2):32-38. Available:https://doi.org/10.51847/50jmUfduf
  2. Tovlahanova TJH et al. Study of the Effect of the Image Scanning Speed and the Type of Conductive Coating on the Quality of Sem-Micrographs of Oxide Nano Materials for Medical Use. Ann Med Health Sci Res. 2021;11:S3:60-64
  3. Rzhepakovsky I, Anusha Siddiqui S, Avanesyan S, Benlidayi M, Dhingra K, Dolgalev A, Enukashvily N, Fritsch T, Heinz V, Kochergin S, Nagdalian A, Sizonenko M, Timchenko L, Vukovic M, Piskov S, Grimm WD. Anti-arthritic effect of chicken embryo tissue hydrolyzate against adjuvant arthritis in rats (X-ray microtomographic and histopathological analysis). Food Sci Nutr. 2021 Aug 18;9(10):5648-5669. DOI: 10.1002/fsn3.2529
  4. Magomedova, A. S., Sheripovna, D. K., Kunkueva, S. A., Muskhanov, M. I., Ibragimov, A. K., Khazamova, S. O., Matveeva, U. V., Mishvelov, A. E., Albegova, B. Z. and Povetkin, S. N. (2021) "Application of a Simulation System Using Augmented Reality to Practice the Skills of Minimally Invasive Spine Surgery", Journal of Pharmaceutical Research International, 33(42A), 66-73. DOI: 10.9734/jpri/2021/v33i42A32385.
  5. Tatamov AA, Boraeva TT, Revazova AB, Alibegova AS, Dzhanaralieva KM, Tetueva AR, Yakubova LA, Tsoma MV, Mishvelov AE, Povetkin SN. Application of 3D Technologies in Surgery on the Example of Liver Echinococcosis. Journal of Pharmaceutical Research International, 2021; 33(40A):256-261. DOI: 10.9734/jpri/2021/v33i40A32242
  6. Pushkin, Sergey Viktorovich, Nagdalian, Andrey Ashotovich, Rzhepakovsky, Igor Vladimirovich, Povetkin, Sergey Nikolaevich, Simonov, Alexander Nikolaevich, Svetlakova, Elena Valentinovna, AFM and CT Study of Zophobas morio Morphology and Microstructure, Entomol Appl Sci Lett, 2018, 5 (3): 35-40
  7. Siddiqui S. A., Ahmad A., Siddiqui A. A. and Chaturvedi P. Stability Analysis of a Cantilever Structure using ANSYS and MATLAB. 2nd International Conference on Intelligent Engineering and Management (ICIEM), 2021, 7-12, DOI: 10.1109/ICIEM51511.2021.9445357
  8. Mezhidov BS, Belyaeva AA, Kh SM, Bimarzaev A, Sh. Bektashev AM, Shekhshebekova MG, Dzgoeva et al. Prospects for creating 3D models of internal organs based on computer and magnetic resonance imaging images in emergency surgery and resuscitation. Pharmacophore. 2021;11(1):8-14
  9. Kubanov SI, Savina SV, Nuzhnaya CV, Mishvelov AE, Tsoroeva MB, Litvinov MS. et al. Development of 3d bioprinting technology using modified natural and synthetic hydrogels for engineering construction of organs, Int. J. Pharm. Phytopharm. Res. 2019;9(5):37-42
  10. Kovalev E.V., Kirilenko S.I., Mazurenko A.N., Filiustin A.E., Dubrovsky V.V. Smartphone-assisted augmented reality technology for preoperative planning in spine surgery. Hirurgia pozvonocnika (Spine Surgery). 2021;18(3):94-99
  11. Yusupova MI, Mantikova KA, Kodzokova MA, Mishvelov AE, Paschenko AI, Ashurova ZAK, et al. Study Of The Possibilities Of Using Augmented Reality In Dentistry. Ann. Dent. Spec. 2021;9(2):17-21
  12. Verhey JT, Haglin JM, Verhey EM, Hartigan DE. Virtual, augmented, and mixed reality applications in orthopedic surgery. Int J Med Robot. 2020 Apr;16(2):e2067. DOI: 10.1002/rcs.2067.
  13. Orsaeva AT, Tamrieva LA, Mischvelov AE, Osadchiy SS, Osipchuk GV, Povetkin SN, Simonov AN. Digital clinic "smart ward. Pharmacophore. 2020;11(1):142-146
  14. Siddiqui, S.A., Ahmad, A. Implementation of Newton's Algorithm Using FORTRAN. SN COMPUT. SCI. 1, 348 (2020). https://doi.org/10.1007/s42979-020-00360-3
  15. Siddiqui S. A. and Ahmad A., "Dynamic analysis of an observation tower subjected to wind loads using ANSYS," 2021 2nd International Conference on Computation, Automation and Knowledge Management (ICCAKM), 2021, pp. 6-11, DOI: 10.1109/ICCAKM50778.2021.9357728.
  16. Siddiqui SA, Ali Redha A, Snoeck ER, Singh S, Simal-Gandara J, Ibrahim SA, Jafari SM. Anti-Depressant Properties of Crocin Molecules in Saffron. Molecules. 2022; 27(7):2076. https://doi.org/10.3390/molecules27072076
  17. Hite G. J., Mishvelov A. E., Melchenko E. A., Vlasov A.A., Anfinogenova O.I., Nuzhnaya C. V., et al. (2019), "Holodoctor Planning Software Real-Time Surgical Intervention", Pharmacophore, 10(3), 57-60, WoS.
  18. Yasnaya MA, Blinov AV, Blinova AA, Shevchenko IM, Maglakelidze DG, Senkova AO. Determination of optimal modes for measuring the size of colloidal particles by photon-correlation spectroscopy and acoustic spectroscopy. Physical and Chemical Aspects of the Study of Clusters Nanostructures and Nanomaterials. 2020;12:232-242
  19. Burbano, A., Vasiliu, M., & Bouaziz, S. (2016). 3D Cameras Benchmark for Human Tracking in Hybrid Distributed Smart Camera Networks. Proceedings of the 10th International Conference on Distributed Smart Camera.
  20. Nguyen, N., Ramjist, J., Jivraj, J., Jakubovic, R.Y., Deorajh, R., & Yang, V.X. (2017). Preliminary development of augmented reality systems for spinal surgery. BiOS.
  21. Bernhardt, S., Nicolau, S., Soler, L., & Doignon, C. (2017). The status of augmented reality in laparoscopic surgery as of 2016. Medical image analysis, 37, 66-90 .
  22. Moreta-Martinez R, Garcia-Mato D, Garcia-Sevilla M, Perez-Mananes R, Calvo-Haro J, Pascau J. Augmented reality in computer-assisted interventions based on patient-specific 3D printed reference. Healthc Technol Lett. 2018 Sep 14;5(5):162-166. DOI: 10.1049/htl.2018.5072.
  23. van Oosterom MN, van der Poel HG, Navab N, van de Velde CJH, van Leeuwen FWB. Computer-assisted surgery: virtual- and augmented-reality displays for navigation during urological interventions. Curr Opin Urol. 2018 Mar;28(2):205-213. DOI: 10.1097/MOU.0000000000000478
  24. Rauf A, Abu-Izneid T, Olatunde A, Ahmed Khalil A, Alhumaydhi FA, Tufail T, Shariati MA, Rebezov M, Almarhoon ZM, Mabkhot YN, Alsayari A, Rengasamy KRR. COVID-19 Pandemic: Epidemiology, Etiology, Conventional and Non-Conventional Therapies. International Journal of Environmental Research and Public Health. 2020; 17(21):8155. https://doi.org/10.3390/ijerph17218155


Other issues:
Vol.13(4)(2022)
Vol.13(3)(2022)
Vol.13(2)(2022)
Archives




Call-for-Papers

Call-for-Scientific Papers
Call-for-Research Papers: ITJEMAST invites you to submit high quality papers for full peer-review and possible publication in areas pertaining engineering, science, management and technology, especially interdisciplinary/cross-disciplinary/multidisciplinary subjects.

To publish your work in the next available issue, your manuscripts together with copyright transfer document signed by all authors can be submitted via email to Editor @ TuEngr.com (please see all detail from Instructions for Authors)



Publication and peer-reviewed process:
After the peer-review process, articles will be on-line published in the available next issue. However, the International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies cannot guarantee the exact publication time as the process may take longer time, subject to peer-review approval and adjustment of the submitted articles.

Disclaimer statement


©2022 All Rights Reserved.